 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Scottsdale, AZ 8700 E. Thomas Road Scottsdale, AZ 85252 (602) 941-6300 Progress Powered by Technology SMAJ5913B THRU SMAJ5956B SILICON 3.0 WATT ZENER DIODES DO-214AC (SMAJ) H Features * For Surface Mount Applications (flat handling surface for accurate placement) to 200V * Zener Voltage 3.3VSurge Stresses Large * WithstandsEquivalent to JEDEC Registered Series IN5913 through IN5956 * Electrically Tape and Reel * Available onCurrent Rating * High Surge Mechanical Data DO-214AC (see dimension * Package similar to JEDECMIL-STD-750, Method 2026 `A' note) Terminals solderable per * Polarity is indicated by cathode band * Maximum temperature for soldering: 260C for 10 seconds * Plastic surface mount body meets UL94V-0 flame retardent epoxy * J Maximum Ratings @ 25C (Unless Otherwise Specified) Forward Voltage Peak Pulse Power Steady State Power Dissipation Operating and Storage Tempertures Thermal Resistance Vf PPP P(AV) TJ, TSTG ROJL 1.2V See Figure 3 3.0W -55C to +150C 25C/W Note 2, 3 Note 1 A E F G C D B Notes: 1. Forward current at 200mA. 2. Mounted on 4.0mm2 copper pads to each terminal. 3. Lead temperature at 75C = TL.. Derate linearly above 75C to zero power at 150C. 1000 900 800 700 600 500 TYPICAL CAPACITANCE IN PICOFARADS 400 300 DIM A B C D E F G H J INCHES MIN / MAX .078 / .115 .052 / .058 - / .005 - / .02 .030 / .060 .055 / .075 .194 / .216 .160 / .180 .100 / .110 MILLIMETERS MIN / MAX 1.98 / 2.92 1.32 / 1.47 - / .127 - / .51 .76 / 1.52 1.65 / 2.13 4.93 / 5.48 3.99 / 4.50 2.57 / 2.79 NOTE 1 200 NOTE 1: THIS MAXIMUM DIMENSION IS LARGER THAN THE STANDARD JEDEC CALL OUT. STANDARD JEDEC IS .105 INCHES OR 2.88 MM. 100 90 80 70 60 50 40 30 PAD LAYOUT At zero volts 0.095" 0.078" At - 2 volts (VR) 20 0.075" 10 0 20 40 60 80 100 120 140 160 180 200 220 ZENER VOLTAGE VZ CAPACITANCE vs. VZ CURVE Santa Ana: (714) 979-8220 Scottscale: (602) 941-6300 Sertech Labs: (617) 924-9280 Ireland: (353) 65-40044 Data Sheet SMCO311A 5/16/97 Colorado: (303) 469-2161 Bombay: (91) 22-832-002 Watertown: (617) 926-0404 Hong Kong: (852) 2692-1202 Chatsworth: (818) 701-4933 Electrical Characteristics @ 25C TYPE NUMBER SMAJ5913 SMAJ5914 SMAJ5915 SMAJ5916 SMAJ5917 SMAJ5918 SMAJ5919 SMAJ5920 SMAJ5921 SMAJ5922 SMAJ5923 SMAJ5924 SMAJ5925 SMAJ5926 SMAJ5927 SMAJ5928 SMAJ5929 SMAJ5930 SMAJ5931 SMAJ5932 SMAJ5933 SMAJ5934 SMAJ5935 SMAJ5936 SMAJ5937 SMAJ5938 SMAJ5939 SMAJ5940 SMAJ5941 SMAJ5942 SMAJ5943 SMAJ5944 SMAJ5945 SMAJ5946 SMAJ5947 SMAJ5948 SMAJ5949 SMAJ5950 SMAJ5951 SMAJ5952 SMAJ5953 SMAJ5954 SMAJ5955 SMAJ5956 Notes: 1. No suffix indicates a 20% tolerance on nominal VZ. Suffix A denotes a 10% tolerance, B denotes a 5% tolerance, C denotes a 2% tolerance, and D denotes a 1% tolerance. 2. Zener voltage (VZ) is measured at TL = 30C. Voltage measurement to be performed 90 seconds after application of dc current. 3. The zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. ZENER TEST DYNAMIC KNEE KNEE REVERSE REVERSE MAX.DC VOLTAGE CURRENT IMPEDANCE CURRENT IMPEDANCE CURRENT VOLTAGE CURRENT V2 IZT ZZT IZK ZZK IR(MAX.) VR IZM VOLTS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 Adc 100 75 25 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 VOLTS 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 mA 908 832 768 696 638 588 534 482 440 400 364 328 300 272 250 230 200 186 166 150 156 124 110 100 90 82 76 68 62 58 52 48 44 40 36 32 30 26 24 22 20 18 16 14 1000 PD. MAXIMUM POWER DISSIPATION (W) TYPICAL PEAK PULSE POWER (W) 4 100 3 2 10.0 1 SMAJ5913-56 1.0 25 50 75 100 125 150 175 200 .01 0.10 1.0 10 100 1000 TL, LEAD TEMPERATURE 3/8" FROM BODY SQUARE WAVE PULSE WIDTH (NON-REPETITIVE) IN MS FIGURE 1. POWER DERATING CURVE FIGURE 2. TRANSIENT SURGE CAPABILITY |
Price & Availability of SMAJ5917
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |